Back to Home PageSite Map
Technical SupportABOUT OUR COMPANYPARTNERSCONTACT US
support > specifications

DVR402/404 SPECIFICATIONS

Resolution: NTSC: D1(704X480), DCIF( 528X320), 2CIF(704 X 240), CIF(352 X 240) PAL: D1(704 X 576), DCIF(528X384), 2CIF(704X288), CIF(352X288)

Compression: MPEG4/H.264 modified, 10 settings for video quality

Frame rate: 1 ~ 30fps/channel

Power requirement: Operating voltage range: 8V – 26V/DC, over voltage protection, system draws less than 15mA when off, Power: typical 22W without heater, peak at 50W with heater

Camera power output: 12 V/DC max 3.0amps (not available when input voltage less than +12V)

Video recording channels: 2~4 channels, 30fps/channel

Video outputs: One DB15 VGA

Audio Recording channels: 2 ~ 4 audio inputs , Audio embedded on Video stream

Internal Hard Drive: Small, Rugged, Hot-Swap Removable, Built-in heater, 40 ~ 160GB (2.5”)

Industry Standard Interfaces: One RS232/GPS port(9pin D-SUB) and One RS485/PTZ port(9pin D-SUB), PS/2 keyboard & mouse, Two USB 2.0 ports, One USB 1.1 port,10/100Base-T, Optional CAN Vehicle Interface,

GPS Option: GPS interface, superimposing location, time, date, speed The GPS module is connected to the DVR with one cable, This cable can be up to 40’ in length.

Working temperature: -30°C to +60°C / -22°F to +140°F

Mounting: Vertical, Horizontal, or Oblique

Housing dimensions: 22.5cm x 5.5cm x19cm / 8.75” x 2.1” x 7.5”

Weight: 1.9kg / 4.2 lbs.



About us   ::   Support   ::   Products   ::   Partners   ::   Contacts

Copyright © 2006 247Security Inc.
Privacy policy